1. Check Wall Space:
• Measure the area on your exterior wall to ensure there is enough space for the width of your number(s).
2. Position the Mounting Template:
• Decide where you want to place your number(s).
• Use Blu Tack or masking tape to temporarily attach the mounting template to the wall.
• Use a spirit level to ensure the template is perfectly straight before proceeding.
3. Drill the Holes:
• Using a drill, carefully drill into the wall at the points marked on the template.
• Drill to a depth that will fully accommodate the nylon threads attached to the number(s).
• Once drilled, remove the template from the wall.
4. Apply Silicon Sealant:
• Take the syringe of clear silicone sealant provided and apply it into each drilled hole.
• Ensure the sealant is evenly distributed by dividing the contents of the syringe equally among all drilled holes.
• Each hole should be adequately filled to provide a secure hold without excess overflow
5. Insert and Secure the Number(s)
• Align the nylon threads (attached to the number) with the drilled holes.
• Press the number(s) into place to your desired depth:
• For a flush look, push them in completely against the wall.
• For a floating effect, leave them slightly protruding.
• Hold the number(s) in place for a few minutes to allow the silicon to begin setting.
6. Secure the Number (Optional):
• For added stability while the silicone dries, you can use painter’s tape to hold the number in place. Remove the tape after the silicone has fully set.
7. Final Adjustments:
• Check that the number is level and correctly positioned.
• Wipe away any excess silicone that may have squeezed out around the holes.
